Rhodium plating gives white gold jewellery a bright, reflective white finish by covering the warmer tint of many white gold alloys. You may need to renew this thin coating as it wears away. It does not increase the gold's strength or purity, and not every white gold piece needs it.
Why is white gold plated with rhodium?
Pure gold is yellow. To make white gold, manufacturers mix it with other metals, such as palladium, nickel, silver and copper, in different combinations. These metals lighten the colour, but the resulting alloy may still look slightly creamy, greyish or pale yellow.
Rhodium is a hard, white metal from the platinum group. Jewellers apply a very thin coating to give white gold a cooler, more even colour. The Gemological Institute of America explains that jewellers commonly plate white gold with rhodium to make it look whiter.
The coating also offers some resistance to fine surface scratches, but it does not make your jewellery scratch-proof. Your ring can still pick up marks through regular wear, and plating cannot strengthen a thin band or secure a loose diamond.
Plating does not change purity. Your 18-carat white gold ring remains 18-carat gold beneath its coating. The rhodium finish does not turn it into a higher-purity gold alloy or into platinum.
Does all white gold need rhodium plating?
No. You can buy some white gold alloys without plating because they have an attractive natural white or grey-white colour. Certain palladium-based alloys can look good unplated, although their precise colour depends on the full alloy composition.
If you prefer a very bright, mirror-like white finish, you may choose a plated piece. If you like the underlying alloy's colour, you can wear suitable white gold jewellery without repeatedly renewing the coating.
Before buying, ask the jeweller whether the piece is plated and what colour you will see underneath. Caratage alone cannot tell you how white it will look. Two pieces of 18-carat white gold can have different colours because they contain different alloying metals.
Why does white gold turn yellow?
Usually, the gold has not changed colour. Friction has worn away part of the rhodium coating, exposing the warmer-coloured alloy beneath it. You may notice this first on the underside of a ring, around its edges or where it rubs against another ring.
A yellowish patch alone does not mean your jewellery is fake or below its stated purity. Rhodium wear affects the surface finish; you need a separate assessment to check the gold's purity.
Soap residue, lotion and dirt can also make your jewellery look dull or discoloured. Ask your jeweller to clean and inspect it before assuming it needs fresh plating. Cleaning can remove deposits, but it cannot replace a coating that has worn off.
How often should you replate white gold?
There is no fixed replating schedule. If you wear a ring every day, you may notice wear within about a year. A pendant or pair of earrings you wear occasionally may keep its finish for several years. Treat these as possibilities, not guaranteed intervals between replating.
How quickly the coating wears depends on several factors:
- How often you wear the piece and how much it touches hard surfaces.
- How much it rubs against stacked rings or other jewellery.
- The thickness and quality of the original coating.
- The colour difference between the rhodium and the underlying alloy.
- Exposure to abrasive cleaners and rough cleaning methods.
Have your jewellery replated when the colour difference bothers you, rather than simply because a set period has passed. If the colour still looks even and you like its appearance, you usually have no cosmetic reason to renew the finish.
Avoid asking for heavy polishing at every visit. Polishing removes a small amount of metal, so unnecessary or aggressive polishing can gradually wear down fine engraving and design details.
What happens during rhodium replating?
Your jeweller first checks the piece for loose stones, worn claws and other damage. After completing any necessary repairs, they clean the surface thoroughly, polish it only as needed and use an electroplating bath to deposit a thin layer of rhodium. They then rinse, dry and inspect the piece.
Plating cannot repair worn claws or fill deep scratches. Ask your jeweller to explain any repair or polishing charges separately from the plating charge, particularly if your piece has delicate detailing.
Your jeweller generally does not need to remove diamonds for routine rhodium replating, but they must check the entire piece before starting. Fracture-filled diamonds, glued settings, pearls and other sensitive gemstones may require different cleaning methods, protection or removal. Tell your jeweller about any stone treatments you know of.
If your jewellery has yellow gold sections, an oxidised finish or contrasting details, ask which areas the jeweller will plate. They may need to protect selected surfaces to preserve the design.
How do you care for rhodium-plated jewellery?
You can reduce avoidable wear with gentle care, though you cannot stop friction from gradually removing the coating. Follow these habits:
- Remove rings before lifting weights, using tools or doing household work that could scratch them.
- Keep your jewellery away from bleach, chlorine and harsh cleaning chemicals.
- Clean suitable diamond jewellery gently with mild soap, lukewarm water and a soft brush, following your jeweller's advice.
- Store pieces separately so they do not rub against each other.
- Avoid abrasive metal polishes and polishing cloths intended to remove tarnish.
If you have a nickel allergy, do not rely on plating as a permanent barrier. Worn patches can expose a nickel-containing alloy. The American Academy of Dermatology identifies nickel in jewellery as a common trigger for allergic contact dermatitis.
Ask your jeweller to confirm the alloy composition rather than assuming all white gold is nickel-free. If your jewellery causes itching, redness or a rash, stop wearing it and consult a dermatologist, especially if the irritation persists.