Home

How Should You Clean Diamond Jewellery at Home?

Clean diamond jewellery at home with lukewarm water, a little mild liquid soap and a very soft brush, provided the stones are secure and the piece has no special care restrictions. Gentle washing removes everyday oil and dirt, but damaged settings, treated diamonds and jewellery containing delicate gemstones need a different approach.

Check the Jewellery Before You Clean It

Look closely at the claws, stone edges, clasp and any fine links before putting the jewellery in water. A claw that catches on fabric, a visible gap around a diamond or a stone that moves needs attention from a jeweller. Do not brush or soak a piece with a loose stone, as cleaning can dislodge it.

Check which other materials are present. A diamond ring set only in gold usually tolerates gentle soap cleaning, but pearls, opals, emeralds, enamel and glued components can require different care. Follow the care instructions for the most delicate material, not just the diamond.

If you know that a diamond is fracture-filled, coated or otherwise treated, follow the treatment-specific cleaning instructions. If you are unsure about an older or inherited piece, ask a jeweller to inspect it before soaking it. Some treatments and repairs are difficult to identify without suitable equipment.

Choose Safe Cleaning Materials

Use a clean bowl, lukewarm water, a few drops of mild liquid soap, a very soft toothbrush and a clean, lint-free cloth. Choose soap without abrasive particles, moisturisers or strong additives, which may scratch the metal or leave a film. Keep the brush only for jewellery so that toothpaste residue does not reach the setting.

The water should feel comfortably warm, not hot. Sudden temperature changes can affect certain gemstones, treatments and repairs, even though an untreated diamond itself tolerates ordinary washing well. A separate bowl also keeps a small earring or pendant away from an open drain.

For gold and diamond jewellery, avoid abrasive polishing cloths unless they are specifically suitable for the metal and finish. Some cloths contain polishing compounds that remove a small amount of surface metal. Rhodium-plated white gold and textured finishes need particular care because repeated polishing can alter their surface.

Clean Diamond Jewellery Step by Step

Work on one piece at a time so that chains do not tangle and diamonds do not rub against other jewellery. Place the bowl on a stable surface with good light, where you can see small stones and fastenings clearly.

  1. Prepare the solution. Mix a few drops of mild liquid soap into lukewarm water. You need a lightly soapy solution, not a thick layer of foam.
  2. Soak briefly. For a secure piece containing only diamonds and suitable metal, around 10 to 15 minutes is often enough to soften everyday dirt. Follow any specific care instructions instead if they recommend avoiding soaking.
  3. Brush gently. Use the soft brush around the setting and underneath the diamond, where oil and soap residue collect. Apply light pressure and do not force bristles beneath claws or into tiny gaps.
  4. Rinse in clean water. Transfer the piece to a second bowl of clean, lukewarm water and gently move it through the water. Repeat with fresh water if any soap remains.
  5. Dry carefully. Pat with a clean, lint-free cloth rather than rubbing firmly. Leave the piece on a dry cloth until moisture has evaporated from the setting before storing it.

If dirt remains after one gentle clean, avoid scrubbing harder or picking it out with a pin. Packed dirt beneath a setting may need professional cleaning, especially when the underside is difficult to reach.

Avoid Harsh Chemicals and Cleaning Shortcuts

Do not use toothpaste, baking soda, scouring powder or rough cleaning pads. A diamond resists scratching, but its gold setting can develop fine scratches from abrasive cleaners. Claws and decorative surfaces can also become worn through repeated harsh cleaning.

Keep jewellery away from bleach, chlorine-based cleaners and strong household cleaning products. These can damage or discolour some metals and affect other materials in the piece. Do not mix household chemicals to make a jewellery cleaner.

Boiling water, steam cleaners and home ultrasonic machines are not suitable for every diamond piece. Ultrasonic vibration can loosen insecure stones, and heat or vibration may damage certain treated diamonds or accompanying gemstones. Use such equipment only after a jeweller has confirmed that the entire piece is suitable.

Know How Often to Clean and When to Get Help

A frequently worn diamond ring may benefit from gentle cleaning every week or two if oil and cream are making it look dull. Earrings and pendants may need washing less often, depending on wear and product build-up. Use the visible condition of the jewellery rather than a fixed schedule.

Home cleaning removes surface dirt, but it cannot tighten claws, repair a worn setting or restore plating. Arrange a professional inspection if a stone moves, a clasp no longer closes securely, or the jewellery has suffered a hard knock. Avoid wearing a piece with suspected damage until it has been checked.

If a diamond still looks cloudy after careful washing and rinsing, do not keep trying stronger cleaners. Residue may remain beneath the setting, or the appearance may have another cause that cleaning cannot change. Ask a jeweller to inspect the stone and setting before attempting another cleaning method.